- Additional information
- Technical Data Sheet
- Color Shades
Size: Gallon (3.64 Ltr), Quarter (0.91 Ltr)
Capital Chemical Industries reflects your taste for refined and opulent coating. It provides a durable and non-dazzling regal matt finish with excellent resistance to moisture and stain. It is alkyd-based paint that is dried by air and retains the original characteristics of excellent finish even after several piles of washing. Available in colors that resonate with your definition of style and charisma.
- Excellent resistance to steam and moisture
- Excellent flow and coverage
- Washable and stain-free
- Excellent resistance to abrasion
Gallon (3.64 Ltr), Quarter (0.91 Ltr)
Reflection 4001, Off White 4002, Peach Silk 4003, Soft Peach 4004, Classic Ivory 4005, Kitten White 4006, Swiss Almond 4007, Ash White 4008, Onyx 4009, Orion 4010, Shingle 4011, Angel 4012, Coral 4013, Apricot 4014, Passion 4015, Lilac 4016, New Angel Blue 4017, Clear Sky 4018, Royale 4019, Jade 4020
Preparation of the surface is the most important step in painting and greatly affects the life and appearance of paint. Newlac Premium Matt Enamel should be applied following the priming. For smoothing out rough surfaces or where surface color has changed appreciably, use of an undercoat is recommended. For maximum durability, apply Newlac Premium Matt Enamel directly to primer. Previously unpainted surfaces must be thoroughly cleaned before painting. Rust, Mill Scale, Oil, Dust and Grease may be removed by wire brushing, abrasive paper or white spirit. Old work,in a bad condition (blistered, flaked, caracked, or powdery) must be burnt off or stripped with paint remover. After cleaning apply one coat of Newlac Undercoat and on its drying apply tow coats of Newlac Premium Matt Enamel. For wood all knots and resinous patches should be treated.
It is often necessary to apply an appropriate “primer” as first coat. All primers should be applied by brush for building surfaces,since spray applied primers do not penetrate or stick to rough or porous surfaces well. Priming coats must be left overnight for hard drying under normal weather conditions. For priming, appropriate Newlac undercoat & Newlac Exterior Primer are available for each type of surface.
Please stir thoroughly before applying to ensure even pigmentation. Thin it down with good quality white spirit to desired application viscosity for brushing & spray. Apply two coats of Newlac Premium Matt Enamel for best results. Between coats allow 12 to 18 hours under normal weather conditions.
Tips For Safety, Economy and Environmental Protection
Keep the paint away from sources of ignition and avoid smoking. Where the painting is in progress ensure adequate ventilation. Do not breathe vapours,use of suitable respiratory equipment is highly recommended. Keep paint container air tight after use and store in a shady & dry place. To save the unused paint for longer period of time, replace the lid firmly and invert the can for few seconds to seal the lid. It will help to prevent skinning. Rinse with plenty of water in case of eye contact and seek medical advice. Use white spirit,turpentine oil or skin cleanser to remove splashes from skin. Scrape excess paint out of brushes and rollers before cleaning. Wash all equipment immediately after use with white spirit or turpentine oil. Shake excess liquid out after washing and then wrap them in a piece of clean cloth. Doing so will revive your brushes back to original. Do not dispose-off excess paint or paint waste into drains or watercourses, disposal should be done in accordance with the environmental regulations.
|Main Uses||Specially designed for kitchens, bathrooms, staircase walls and corridors. Also suitable for interior and exterior wood, metal and masonry work.|
|Colour Range||Please refer to standard Colour Card.|
|Covering Capacity||10-12 m²/litre per coat.|
|Drying Time||Surface Dry: 3 hours, Recoat ability 12-118 hours (Depending on the Humidity & Temperature)|
|Packaging||Gallon (3.64 Ltr), Quarter (0.91 Ltr)|