Saver Series Emulsion

Description

Capital Chemical Industries Emulsion endorses CCI’s motto to provide excellent quality paint at an affordable price. It is water-based economic matt and smooth emulsion paint for application on internal walls of buildings. It is suitable for new and previously painted surfaces such as cement, plaster, bricks, ceilings, hard boards, soft boards, etc. Choose your colors from an extensively wide range of color palettes to design your own paradise.

• • Vinyl based binder
  • Durable and easy to use
  • Enriched with appealing perfume
  • Quick-drying and good coverage

Additional information

Size	Drummy (14.56 Ltr), Gallon (3.64 Ltr), Quarter (0.96 Ltr)

Surface Preparation

New Surface:

Rub the new surface with a grinding stone or sandpaper and remove all the dust with a cloth. Please ensure that surface is dry and free from powdery material. apply one coat of Saver Series Undercoat and allow the primer to dry hard overnight. Finally, sandpaper it and apply Saver Series Emulsion Now,

Old Surface:

Saver Series Emulsion can be applied directly after normal cleaning if the existing paint is sound. In case, old paint is cracking or flaking removes the defective material by scraping. Dust off the surface and apply one coat of Saver Series Undercoat. When the primer is hard, apply 2 or 3 coats of Saver Series Emulsion

Application

Please stir thoroughly before applying to ensure even pigmentation. Thin down the paint with an equal quantity of clean water under constant stirring for the first coat. For subsequent coats, 2 liters of water for one gallon of Saver Series Emulsion would be sufficient. Paint can be applied by brush or roller or spray.

Tips For Safety, Economy and Environmental Protection

Keep the paint container airtight after use and store it in a shady & dry place. To save the unused paint for a longer period of time replace the lid firmly and invert the can for a few seconds to seal the lid. It will help to prevent skinning. Scrape excess paint out of brushes and rollers before cleaning. Wash all equipment immediately after use with clean water or a mild detergent solution. Shake excess water out then wrap them in a piece of clean cloth. Doing so will revive your brushes back to the original. Do not dispose-off excess paint into drains or watercourses; disposal should be done in accordance with the environmental regulations. If paint spills onto your body or in your eyes, wash thoroughly with clean water and seek medical advice.  

Main Uses	All types of interior masonry surfaces such as plaster, concrete, cement, wallboard and brickwork.
Colour Range	Please refer to standard Colour Card.
Covering Capacity	12-14 m²/litre per coat.
Number of Coats	Two or Three
Drying Time	Surface Dry: 30 minutes, Recoat ability 2-3 hours (Depending on the Humidity & Temperature)
Packaging	Drummy (14.56 Ltr), Gallon (3.64 Ltr), Quarter (0.96 Ltr)