- Description
- Additional information
- Technical Data Sheet
- Color Shades
Description
Size: Drummy (20.00kg), Gallon (5.00kg)
SuperFine wall filler is for interior and Exterior plastered surfaces or painted walls with outstanding filling properties. It will hide the surface imperfections and help obtain a smooth high quality finish. It will minimize the absorption and save the cost of the first coat of paint
Additional information
| Size | Drummy (20.00kg), Gallon (5.00kg), Quater (1.25kg) |
|---|---|
| Base | Interior (PVA BASE), Exterior (ACRYLIC BASE) |
Surface Preparation
Ensure that the surface is fully dry & free from powdery material for maximum adhesion. This can be achieved by rubbing with abrasive paper followed by the removal of loose dust with solvent soaked cloth. When completely dry apply one coat of SuperFine Wall Filler and let it dry for 24 hours. It will completely fill all the pores and holes in the surface and will make it non-permeable for moisture thereby helps in achieving better coverage and surface finishing.
Application
Apply SuperFine Wall Filler with scraper. Apply 2-3 coats as required and let it dry for 8 hours. Once dried apply , SuperFine Weather Power, or SuperFine Plus Emulsion. Please note that use of Filler on the Exterior surface is not recommended use Plaster / Cement mix for removing surface defects.
Tips For Safety, Economy and Environmental Protection
Keep paint container air tight after use and store in a shady & dry place. Rinse with plenty of water in case of eye contact and seek medical advice. Use skin cleanser to remove splashes from skin. Scrape excess paint out of brushes and rollers before cleaning. Wash all equipment immediately after use water. Do not dispose-off excess paint or paint waste into drains or watercourses disposal should be done in accordance with the environmental regulations.
| Main Uses | Used as a filling coat on walls, ceilings and all other masonry surfaces before applying SuperFine Plus Emulsion, Weather Power or Value Emulsion. |
| Covering Capacity | 5-6 m²/Kg per application |
| Application | Brush or Roller |
| Drying Time | Surface Dry: 12 Hours, Recoat ability 18 hours |
| Packaging | 20Kg , 5Kg |
