Saver Series Synthetic Under Coat

Description

Capital Chemical Industries Synthetic Under Coat is an interior and exterior primer coat in an alky system. It is specially designed for a variety of substrates such as woodwork, timber, and fiberboard. It gives maximum enamel holdout and provides a smooth tough surface.

• Excellent adhesion
• Alkali System
• Excellent Sealing Properties
• High Coverage

Additional information

Surface Preparation

Ensure the surface is fully dried & free from powdery material which can be achieved by rubbing with abrasive paper followed by the removal of loose dust with solvent-soaked cloth. When completely dry apply one coat of Saver Series Synthetic Under Coat and let it dry for 24 hours.

Application

Thin Saver Series Synthetic Under Coat with 10-15% good quality white spirit. Apply one coat and let it dry for 24 hours. Filling if required should be done with putti. Let it dry before applying Saver Series Emulsion, Saver Series Weather Saver, Enamel or Matt Finish.

Tips For Safety, Economy and Environmental Protection

Keep the paint away from sources of ignition and avoid smoking. Where the painting is in progress ensure adequate ventilation. Do not breathe vapours, use of suitable respiratory equipment is highly recommended. Keep paint container air tight after use and store in a shady & dry place. To save the unused paint for longer period of time,replace the lid firmly and invert the al the lid. Rinse with plenty of water in case of eye contact and seek medical advice. Use white spirit,turpentine oil or skin cleanser can for few seconds to se to remove Paint from skin. Scrape excess paint out of brushes and rollers before cleaning. Wash all equipment immediately after use with white spirit or turpentine oil. Shake excess liquid out after washing and then wrap them in a piece of clean cloth. Doing so will revive your brushes back to original. Do not dispose-off excess paint in accordance with the environmental regulations.

Gobis Color Collection