- Description
- Additional information
- Technical Data Sheet
- Color Shades
Description
Size: Drumi (14.56 Ltr), Gallon (3.64 Ltr),
NewLac Water Based Primer is a general-purpose pigmented undercoat that is used to seal pores and imperfections of plaster, concrete and gypsum surfaces and to prepare the primer surface for the final application of paint. The product is suitable for interior and exterior surfaces, providing an ideal finish for subsequent coats.
Additional information
| Size | Drummy (14.56 Ltr), Gallon (3.64 Ltr) |
|---|---|
| Category | Interior, Exterior |
Surface Preparation
New and bare surfaces: Must be clean, dry and free from efflorescent salts. Scuff the surface with suitable sandpaper or sandstone to make the plaster surface smooth. Dust off and apply a priming coat of NewLac Water Based Primer (Interior & Exterior). Allow the Primer to dry for 2-3 hours. Previously painted sound surface (all weathers): remove all defective or poorly adhering material by rubbing down using a suitable abrasive paper or stiff brush and dust off. let the surface dry. prepare its surface using the same procedure as given above.
Powdery, Dusty Surface, Cracks: for large holes and cracks use plaster of paris or white cement. Allow to dry. remove all defective or poorly adhering material by rubbing down using a suitable abrasive paper or stiff brush and dust off. let the surface dry. Prepare the surface using the same procedure as given above. Finishing: The Primed surface can be smoothened with NewLac Filler and subsequently painted with Newlac Weather Shield.
Application
Apply NewLac Water Based Primer with the use of a brush, roller or spray. Apply 1-2 coats as required and let it dry for 2-3 hours. Once dried apply MOBI Plastic Emulsion, Newlac Weather Shield. or Newlac Premium Emulsion.
Tips For Safety, Economy and Environmental Protection
Keep paint container air tight after us e and store in a shady & dry place. Rinse with plenty of water in case of eye contact and seek medical advice. Use skin cleanser to remove splashes from skin. Scrape excess paint out of brushes and rollers before cleaning. Wash all equipment immediately after use water. Do not dispose-off excess paint or paint waste into drains or watercourses disposal should be done in accordance with the environmental regulations.
| Main Uses | The primer provides excellent alkali resistance, improves adhesion of topcoat, and provides a uniform surface for filler or topcoat application |
| Covering Capacity | 16-18 m²/litre per coat. |
| Thinner | Clean Water |
| Application | Brush, Roller Spray |
| Drying Time | Surface Dry: 30 minutes, Recoat ability 2-3 hours (Depending on the Humidity & Temperature) |
| Packaging | Drummy (14.56 Ltr), Gallon (3.64 Ltr) |
