- Description
- Additional information
- Technical Data Sheet
- Color Shades
Description
Size: Gallon (3.64 Ltr), Quarter (0.91 Ltr)
SuperFine Under Coat is an oil-based, non-absorbent, intermediate prep coat with excellent hiding power, filling and sanding properties and good hold out for gloss and matt enamels. It prepares paint surfaces to give the perfect base for your final topcoat. It is highly recommended for use on all interior and exterior surfaces like wood, metal, iron, etc.
Additional information
| Size | Gallon (3.64 Ltr), Quarter (0.91 Ltr) |
|---|---|
| Color | White, Grey |
Surface Preparation
Ensure the surface is fully dried & free from powdery material which can be achieved by rubbing with abrasive paper followed by the removal of loose dust with solvent-soaked cloth. When completely dry apply one coat of SuperFine Under Coat and let it dry for 24 hours.
Application
Thin Newlac Premium Under Coat with 10-15% good quality white spirit. Apply one coat and let it dry for 24 hours. Filling if required should be done with putti. Let it dry before applying SuperFinePremium Emulsion, SuperFine Weather Shield, Enamel or Matt Finish.
Tips For Safety, Economy and Environmental Protection
Keep the paint away from sources of ignition and avoid smoking. Where the painting is in progress ensure adequate ventilation. Do not breathe vapours, use of suitable respiratory equipment is highly recommended. Keep paint container air tight after use and store in a shady & dry place. To save the unused paint for longer period of time,replace the lid firmly and invert the al the lid. Rinse with plenty of water in case of eye contact and seek medical advice. Use white spirit,turpentine oil or skin cleanser can for few seconds to se to remove Paint from skin. Scrape excess paint out of brushes and rollers before cleaning. Wash all equipment immediately after use with white spirit or turpentine oil. Shake excess liquid out after washing and then wrap them in a piece of clean cloth. Doing so will revive your brushes back to original. Do not dispose-off excess paint in accordance with the environmental regulations.
| Main Uses | Used as sealer coat on walls, ceilings and all other masonry surfaces as wood sealer on wooden surfaces before applying Plastic Emulsion, Weather Shield, Super Emulsion. It provides maximum |
| Covering Capacity | 8-12 m²/litre per coat. |
| Drying Time | Surface Dry: 30 minutes, Recoat ability 2-3 hours (Depending on the Humidity & Temperature) |
| Packaging | Gallon (3.64 Ltr), Quarter (0.91 Ltr) |
