Newlac Weather Shield

Description

Size: Drummy (14.56 Ltr), Gallon (3.64 Ltr), Quarter (0.91 Ltr)

Newlac Weather Shield is based on 100% acrylic emulsion. It is ready to use the product for filling blemishes, cracks, and holes on masonry surfaces and patching up surface imperfections on plastered walls. It is specially formulated for leveling minor surface irregularities.

It is recommended for both internal and external applications.

• Excellent whiteness and application
• High quality and filling properties
• Fast drying and smooth finish
• Excellent abrasion resistance

Additional information

Size

Drummy (16.00 Ltr), Gallon (4.00 Ltr), Quarter (1 Ltr)

Shade

Off White 5010, Almond 5058, Sugar Cane 5028, Biscuit 5037, Sea Shell 5036, Hopsack 5049, Cameo 5016, Autumn Stone 5003, Beige 5018, Tobacco 5057, Ivory 5041, Yellow 5039, Chinnamon 5039, Honey Dew 5009, Orange 5002, Sand Stone 5021, Tea Rose 5020, Fresh Brown 5040, Terracotta 5015, Spice 5005, Bright Pink 5042, Sweet Jewel 5007, Salmon 5008, Arizona Sunset 5006, Cappuccino 5038, Harvest Orange 5051, Pindi Pink 5035, Tile Red 5017, Red Oxider 5011, Lamborgani Pink 5055, Pacific Ocean 5044, Turquoise 5022, jade 5012, Admiral 5001, Metallic Green 5056, Sea Wind 5032

Surface Preparation

Remove mould & algae patches with a hard brush and wash the surface with a domestic bleach solution (1 part bleach + 1 part water). After 3 days. once again wash the surface with water to remove traces of chlorine and let it dry. Apply one coat of Newlac Undercoat, and let it dry hard. Then apply 2 to 3 coats of Newlac Weather Shield. If the existing paint is sound, SuperFine Weather Power may be applied directly after normal cleaning. If the old paint is loose or flaking, defective material should be removed by scraping. Finally, apply 2 to 3 coats of Newlac Weather Shield. Please note that filling putti on the exterior surfaces is not recommended, use plaster/cement mix for removing surface defects.

Thinning:

Ideally, thin 4 litres of Newlac Weather Shield with 2-3 litres of clear water. However, high-porosity surfaces will require more thinning than low-porosity surfaces.

Application

Before use, mix thoroughly to ensure that all the pigments are evenly dispersed. Thinning should be done under constant stirring. Apply 2-3 coats of Newlac Weather Shield allowing 2-3 hours between coats.

Tips For Safety, Economy and Environmental Protection

Keep the paint container airtight after use and store in a shady & dry place. Scrape excess paint out of brushes and rollers before cleaning. Wash all equipment immediately after use with clean water or a mild detergent solution. Shake excess water out then wrap them in a piece of clean cloth. Doing so will revive your brushes back to the original. Do not dispose-off excess paint into drains or watercourses, disposal should be done in accordance with the environmental regulations. If paint spills onto your body or in your eyes, wash thoroughly with clean water and seek medical advice. Spots and splashes should be washed off before they have dried as Newlac Weather Shield is resistant to water and washing, once it is dry.  

Main Uses	Most suitable for all types of exterior surfaces such as plaster, concrete, brick & pebble dash etc. It is resistant to all weather hazards. It is also a superior finish for interior surfaces.
Colour Range	Please refer to standard Colour Card.
Covering Capacity	10-13 m²/litre per coat.
Application	Brush or Roller
Drying Time	Surface Dry: 30 minutes, Recoat ability 2-3 hours (Depending on the Humidity & Temperature)
Packaging	Drummy (14.56 Ltr), Gallon (3.64 Ltr), Quarter (0.91 Ltr)